Simon Males discusses winter mining challenges, hardware variability, and Braiins OS features for cold-weather optimization
Summary
Simon Males joins HashRate Up to detail the operational complexities of Bitcoin mining during winter, emphasizing that while cold weather reduces heat-related failures, it introduces risks like coolant freezing and thermal shock. He highlights significant performance variability in Bitmain's S21+ Hydro due to silicon binning, describing the purchasing process as a 'lottery' for buyers. Males also introduces Braiins OS features such as 'Defrost' for cold booting, 'Hot Start Protection' to prevent overheating damage, and a 'Continuous Tuner' that dynamically adjusts settings based on real-time environmental data. The discussion covers the trade-offs between different cooling methods and chip manufacturers, noting MicroBT's resilience in harsh environments versus Samsung's thermal advantages over TSMC chips.
Key takeaways
- 1 the S twenty three Hydro, uh which we'll have support for uh at the end of November is the best uh machine we've ever seen. its sticker label is nine point five joules per terahash. And in our testing, so you know in in our testing, yeah, Yeah, it's nine point two ju nine point two joules per tera terahash. hash.
Unidentified speaker (speaker_1) · 2:14
- 2 MicroBT miners are favored in remote, harsh environments (e.g., Africa) because their operational resilience and uptime reliability are prioritized over raw efficiency metrics.
Unidentified speaker (speaker_0) · 28:08
- 3 The recommended default alarm threshold for chip temperature is 90°C, though some operators may push Bitmain/Avalon units higher if the hardware is near end-of-life.
Unidentified speaker (speaker_1) · 30:35
Episode sections
- 0:00 – 1:48
Intro and Winter vs Summer Mining
Simon Males joins HashRate Up to discuss winter mining challenges and Braiins OS features. He prefers winter mining because heat-related issues are reduced, allowing for more aggressive overclocking, though it requires specific management to avoid cold-weather failures.
- 1:48 – 8:27
S23 Hydro Performance and Silicon Lottery
The Antminer S23 Hydro achieves 9.2 J/TH in Braiins testing, beating its 9.5 J/TH sticker rating. Males notes that Bitmain's S21+ Hydro has multiple hardware variations (silicon bins) with different performance characteristics, making it a 'lottery' for buyers.
- 8:27 – 18:12
Cold Weather Booting and Defrost Feature
Hydro-cooled ASICs will not boot below 10°C due to coolant temperature gates. Braiins OS includes a 'Defrost' feature that applies power to the boards to warm them up for initialization. Air-cooled miners are more resilient to cold than hydro-cooled ones.
- 18:12 – 22:34
Coolant Chemistry and Glycol Mixing
Operators describe glycol mixing as 'alchemy' because the ratio must be adjusted seasonally; too much glycol in winter prevents freezing but reduces heat transfer efficiency. Braiins firmware currently lacks visibility into external cooling infrastructure like dry coolers.
- 22:34 – 28:08
MicroBT and Avalon Support Challenges
MicroBT (WhatsMiner) machines have robust native firmware and strong protections against third-party software, making them hard to support. Braiins is testing firmware for the Avalon A15 Pro to fix power overshoot issues that cause breaker trips in retrofitted facilities.
- 28:08 – 28:48
MicroBT Resilience vs. Samsung Chip Thermals
Speaker_0 notes that MicroBT miners are preferred in harsh, remote African sites because keeping the miner online is prioritized over peak efficiency. Samsung chips offer a broader operating temperature margin compared to TSMC chips found in Bitmain machines.
- 28:48 – 30:15
Rapid Fire: Winter Mistakes and Hot Start Protection
Speaker_1 identifies broken pumps as a critical winter failure point for hydro-cooled miners, leading to hashboard burns. They introduce 'Hot Start Protection' in Braiins OS, which prevents booting if inlet temperatures are too high, warning against blindly resuming miners that stopped due to overheating.
- 30:15 – 31:45
Critical Temperature Alarms and Mine Design Preferences
Speaker_1 recommends monitoring chip temperature, defaulting to a 90°C alarm threshold. For new Canadian mines, they advise against immersion cooling due to repair complexity, recommending hydro-cooling for baseload power and air-cooling for sites subject to curtailment.
- 31:45 – 32:50
Continuous Tuner Feature Explanation
Speaker_1 explains the new 'Continuous Tuner' feature in Braiins OS, which constantly samples environmental conditions to adjust miner settings. Unlike the previous auto-tuner pinned to specific ambient temperatures, this feature maintains stable power draw and maximizes output across varying day/night conditions.
- 32:50 – 33:50
Conclusion and Contact Information
Speaker_1 directs listeners to Braiins.com for firmware downloads and Twitter/LinkedIn for video updates, identifying himself as Simon Males.
Assets discussed
| Asset | Kind | Stance | Context |
|---|---|---|---|
| BitcoinBTC | crypto | neutral | and consulting, they are a proper one-stop shop for Bitcoin mining gear. |
“Stance” is how the speakers talked about the asset, not a recommendation.
Claims worth verifying
The Antminer S23 Hydro achieved 9.2 J/TH in Braiins testing, beating its 9.5 J/TH sticker rating.
Unidentified speaker (UNKNOWN) ·2:14
How to verify: Check Braiins OS release notes or performance benchmarks published on braiins.com for S23 Hydro efficiency data. For recent events, verify 2026-08-18 through 2026-11-18. Use another period only when the speaker explicitly names it.
Hydro-cooled ASICs will not boot below 10°C due to a hardware gate protecting the miner.
Unidentified speaker (UNKNOWN) ·8:37
How to verify: Verify against Bitmain technical specifications for hydro-cooled models or Braiins OS documentation on cold-start protections. For recent events, verify 2026-08-18 through 2026-11-18. Use another period only when the speaker explicitly names it.
Primary sourceThe S21+ Hydro has at least three different hardware variations with different PSUs and voltage delivery.
Unidentified speaker (UNKNOWN) ·3:43
How to verify: Cross-reference Braiins OS hardware identification guides or Bitmain service manuals for S21+ Hydro revisions. For recent events, verify 2026-08-18 through 2026-11-18. Use another period only when the speaker explicitly names it.
Braiins OS support for the S23 Hydro and S21 JXP was scheduled for late November 2026.
Unidentified speaker (UNKNOWN) ·2:05
How to verify: Check Braiins OS release history or changelog for version dates corresponding to late November 2026. For recent events, verify 2026-08-18 through 2026-11-18. Use another period only when the speaker explicitly names it.
The Antminer S21 JXP uses the same chip as the S23 Hydro.
Unidentified speaker (speaker_1) ·3:07
How to verify: Verify chip specifications (e.g., BM1762) in Bitmain datasheets or Braiins OS hardware database. For recent events, verify 2026-08-18 through 2026-11-18. Use another period only when the speaker explicitly names it.
Avalon A15 Pro miners can overshoot power by 400-500 watts, causing breaker trips in retrofitted S19 facilities.
Unidentified speaker (speaker_1) ·25:48
How to verify: Check Braiins OS bug reports or user forums for A15 Pro power overshoot incidents and facility retrofit case studies. For recent events, verify 2026-08-18 through 2026-11-18. Use another period only when the speaker explicitly names it.
MicroBT (WhatsMiner) firmware includes protections that make third-party software integration difficult.
Unidentified speaker (speaker_1) ·23:53
How to verify: Review WhatsMiner firmware documentation or third-party firmware vendor statements regarding compatibility restrictions. For recent events, verify 2026-08-18 through 2026-11-18. Use another period only when the speaker explicitly names it.
Braiiins has a thermal chamber that operates from -30°C to +70°C.
Unidentified speaker (speaker_0) ·9:36
How to verify: Verify via Braiins thermal chamber video or technical specifications of their testing facility equipment. For recent events, verify 2026-08-18 through 2026-11-18. Use another period only when the speaker explicitly names it.
The S21+ Hydro 338 TH/s batch outperforms the 358 TH/s batch in Braiins testing.
Unidentified speaker (speaker_1) ·5:11
How to verify: Check Braiins OS performance benchmarks comparing different S21+ Hydro hash rate variants. For recent events, verify 2026-08-18 through 2026-11-18. Use another period only when the speaker explicitly names it.
MicroBT miners are preferred in Africa because keeping the miner online is more important than efficiency in harsh, remote conditions.
Unidentified speaker (speaker_0) ·28:08
How to verify: Industry surveys of African mining operations or case studies from Braiins on site reliability in remote regions. For recent events, verify 2026-08-18 through 2026-11-18. Use another period only when the speaker explicitly names it.
Samsung chips have a broader operating temperature margin compared to TSMC chips found in Bitmain machines.
Unidentified speaker (speaker_0) ·28:27
How to verify: Technical datasheets for Samsung and TSMC ASIC chips comparing thermal operating ranges. For recent events, verify 2026-08-18 through 2026-11-18. Use another period only when the speaker explicitly names it.
Broken pumps in hydro-cooled miners can cause hashboard burns during winter.
Unidentified speaker (UNKNOWN) ·29:34
How to verify: Braiins OS documentation on failure modes or incident reports from Braiins support channels. For recent events, verify 2026-08-18 through 2026-11-18. Use another period only when the speaker explicitly names it.
Braiins OS includes 'Hot Start Protection' that prevents miners from starting if inlet temperatures are too high.
Unidentified speaker (speaker_1) ·29:56
How to verify: Braiins OS firmware release notes or user manual verifying the existence and function of this safety feature. For recent events, verify 2026-08-18 through 2026-11-18. Use another period only when the speaker explicitly names it.
The default chip temperature alarm threshold in Braiins OS is 90°C.
Unidentified speaker (speaker_1) ·30:35
How to verify: Braiins OS settings interface or configuration documentation showing default alarm values. For recent events, verify 2026-08-18 through 2026-11-18. Use another period only when the speaker explicitly names it.
Immersion cooling is discouraged for new Canadian mines due to repair complexity, while hydro is preferred for baseload and air for curtailment.
Unidentified speaker (UNKNOWN) ·31:29
How to verify: Braiins technical blog posts or whitepapers on mine design recommendations for cold climates. For recent events, verify 2026-08-18 through 2026-11-18. Use another period only when the speaker explicitly names it.
The 'Continuous Tuner' feature constantly samples environmental conditions to adjust miner settings, unlike the previous auto-tuner which was pinned to specific ambient temperatures.
Unidentified speaker (UNKNOWN) ·32:11
How to verify: Braiins OS feature documentation comparing the logic of 'Continuous Tuner' versus 'Classic Auto-Tuner'. For recent events, verify 2026-08-18 through 2026-11-18. Use another period only when the speaker explicitly names it.
Simon Males is the contact for Braiins OS updates and videos.
Unidentified speaker (speaker_1) ·33:01
How to verify: Braiins official website or social media profiles confirming Simon Males' role and content distribution channels. For recent events, verify 2026-08-18 through 2026-11-18. Use another period only when the speaker explicitly names it.
Do your own research
- Verify Braiins OS firmware release notes for S23 Hydro support timelines and specific tuning parameters.
- Check Bitmain's official specifications for S21+ Hydro silicon binning disclosures and warranty terms regarding performance variability.
- Review Braiins OS documentation for 'Defrost' and 'Hot Start Protection' configuration limits and alarm thresholds.
- Consult coolant manufacturer guidelines for glycol concentration ratios and heat transfer efficiency charts for winter operations.
- Compare MicroBT WhatsMiner and Bitmain Antminer thermal specifications and warranty policies for harsh environment usage.
- Analyze Braiins OS 'Continuous Tuner' logs to assess power draw stability versus static tuning in variable ambient conditions.
- Verify local electrical codes and breaker trip thresholds for retrofitted facilities using high-draw hydro-cooled miners.
- Research Samsung vs. TSMC chip thermal tolerance data sheets for cold-climate mining applications.
Full transcriptexpand
- 0:00
- Unidentified speaker (speaker_0): Alright, everybody, welcome back to HashRate Up. This week I have Mr. Simon Malesh or Simon Mails of BrainsOS on the show. We talk about mining in winter, features in BrainsOS, and much more. Enjoy the show.
- 0:23
- Unidentified speaker (speaker_0): Welcome back to the show, guys. Today I am with Mr. Simon. Malesz, straight from Prague in the Czech Republic. He you cannot see, but he is wearing his Brains t-shirt. Um like a very very uh uh I wanna I don't want to say soldier,
- 0:41
- Unidentified speaker (speaker_0): but uh he's rapping he's rapping he's repping the company that he works for. Uh Simon is with Brains. Um the rough context I got Simon was that. you are working on firmware. That's what we're gonna talk about today. I just had the guys from BigSpit on so this will be a nice follow-up to that. First off
- 1:01
- Unidentified speaker (speaker_0): though, what do you prefer? Mining in summer or in winter? Because one of the two we will talk about more today.
- 1:09
- Unidentified speaker (speaker_1): I think I'm more of a winter mining guy because a lot of the problems we face are heat related and there's less heat,
- 1:17
- Unidentified speaker (UNKNOWN): uh
- 1:17
- Unidentified speaker (speaker_1): less extreme heat. I think the winter is a good time to like push your miner a little bit harder. So
- 1:23
- Unidentified speaker (UNKNOWN): put
- 1:23
- Unidentified speaker (speaker_1): me on the winter side, but it's not it's not a free thing. You have to work for
- 1:27
- Unidentified speaker (UNKNOWN): it.
- 1:28
- Unidentified speaker (speaker_0): You you you're for overclocking, not underclocking, is what you're saying.
- 1:33
- Unidentified speaker (UNKNOWN): I
- 1:33
- Unidentified speaker (speaker_1): am definitely for underclocking when it's damn hot. But you
- 1:38
- Unidentified speaker (UNKNOWN): need
- 1:38
- Unidentified speaker (speaker_1): a catch catch-up, up. right? You've invested in your hardware and you bought this lovely little buzzing machine and you wanted to see what it can do, and winter is the time to do
- 1:47
- Unidentified speaker (UNKNOWN): it.
- 1:48
- Unidentified speaker (speaker_0): Follow-up question: What's your favorite machine in the winter? What performs best, to your opinion, with Brain's firmware installed? Um, in the
- 1:58
- Unidentified speaker (UNKNOWN): I mean,
- 1:58
- Unidentified speaker (speaker_1): if you really want the best, and please time this video when when it's released. But uh
- 2:05
- Unidentified speaker (UNKNOWN): uh
- 2:05
- Unidentified speaker (speaker_1): the S twenty three Hydro, uh which we'll have support for uh at the end of November is the best uh machine we've ever seen.
- 2:14
- Unidentified speaker (UNKNOWN): Uh
- 2:14
- Unidentified speaker (speaker_1): its sticker label is nine point five joules per terahash. And in our testing, so you know in in our testing, yeah, Yeah, it's nine point two ju nine point two joules per tera terahash. hash. So
- 2:26
- Unidentified speaker (UNKNOWN): wow.
- 2:27
- Unidentified speaker (speaker_0): Okay, but is it is it worth the the price tag, Simon? Do you think? Because it's a big investment and
- 2:34
- Unidentified speaker (UNKNOWN): Bitmain
- 2:35
- Unidentified speaker (speaker_0): still has that bit main factor. And I don't think I ever want to be the guy that buys the first batch of any model that Bitmain comes
- 2:43
- Unidentified speaker (UNKNOWN): out
- 2:43
- Unidentified speaker (speaker_0): with.
- 2:44
- Unidentified speaker (UNKNOWN): So
- 2:44
- Unidentified speaker (speaker_1): we were we were part of the first batch uh to to get it out there. I think if your you're like a small-ish miner, then definitely not. Go with something that's tried and tested. But you know, the S33 Hydro is interesting because it has a new chip from Bitmain, the BM 17. Oh no, I'm gonna lose the number.
- 3:04
- Unidentified speaker (speaker_1): 1762. It's
- 3:05
- Unidentified speaker (UNKNOWN): fine.
- 3:06
- Unidentified speaker (speaker_1): Yeah.
- 3:07
- Unidentified speaker (speaker_1): But there is another S21 series that has the same chip. So the S21 JX JXP,
- 3:13
- Unidentified speaker (UNKNOWN): XP.
- 3:14
- Unidentified speaker (speaker_1): the J S21 JXP, uh which we'll also have support for at the end of November, actually has the same chip, which is weird because the S23 Hydro S23 series is meant to be the all-in-new chip, but the S21 series also has a new chip, so uh we're also getting some good gains there too. So that's that's an opportunity. But what what is my
- 3:34
- Unidentified speaker (speaker_1): favorite one? Uh I would say the S21 Plus Hydro, but again. there's more nuances there because Bitmain
- 3:43
- Unidentified speaker (UNKNOWN): has
- 3:43
- Unidentified speaker (speaker_1): a S21 Plus Hydro, but we've seen at least three different variations of them. And we have we are using a variation called the what we call the high voltage. They have different PSUs
- 3:53
- Unidentified speaker (UNKNOWN): and
- 3:54
- Unidentified speaker (speaker_1): they're pushing more voltage to the chips. And we are getting a really good uh gains on that.
- 4:01
- Unidentified speaker (UNKNOWN): Uh
- 4:02
- Unidentified speaker (speaker_0): is the is so question there. So the S21 Plus Hydro comes with like 395, 358 terahash, right? Are those the models you're referring to? And then if so, which terahash do you prefer?
- 4:14
- Unidentified speaker (speaker_1): No, it's not what I mean. Uh so uh we supported the S21 Plus Hydro, I think, sometime last year.
- 4:22
- Unidentified speaker (UNKNOWN): Uh
- 4:22
- Unidentified speaker (speaker_1): and then we uh we have developed our own uh uh hydro site in in houston so that's the one place where brains is mining for profit and we bought these s20 plus hydros uh and but before we did that we bought some like new batch to see what's up and it's really like completely new different miner they have the exact same name but they
- 4:42
- Unidentified speaker (speaker_1): have
- 4:43
- Unidentified speaker (UNKNOWN): they
- 4:43
- Unidentified speaker (speaker_1): have the same like terahash rating but they're you open them up they are different machines so we actually have had to like do support for a brand new miner
- 4:52
- Unidentified speaker (speaker_1): And not only that, but the uh so the site actually has a mix, has a mix of old and new variations and our underclocked ones, or not the underclocked uh under the lower spec ones, so it's a thing it's three thirty eight is actually outperforming the three fifty eight. The three 338 thirty eight is uh like new batch and three 358 fifty eight is
- 5:11
- Unidentified speaker (speaker_1): old batch and we're getting more gains uh using on the on the new batch with the lower hash rate.
- 5:19
- Unidentified speaker (UNKNOWN): So,
- 5:19
- Unidentified speaker (speaker_0): how can I make sure I buy the better version?
- 5:23
- Unidentified speaker (speaker_1): We are fighting this every not every day, but I'm fighting this problem right this week because a client of ours has found another variation which normally normally has 95 chips on the hashboard. There's another variation that has 85. Asked our supplier, can you please get us this? We want to support it, we want to test. it.
- 5:39
- Unidentified speaker (UNKNOWN): And
- 5:39
- Unidentified speaker (speaker_1): they said we can't guarantee it. It's like a lottery. They don't know what's in the box.
- 5:44
- Unidentified speaker (speaker_1): So
- 5:45
- Unidentified speaker (UNKNOWN): the only
- 5:46
- Unidentified speaker (speaker_1): tip I've gotten so far is somehow ensure it's coming from the factory and not some warehouse. You want it to come like new, new batch.
- 5:55
- Unidentified speaker (speaker_0): Yeah, but that means you'll pay the premium.
- 5:58
- Unidentified speaker (speaker_1): What do you want? Do you want a great miner, or do you want
- 6:02
- Unidentified speaker (UNKNOWN): I want
- 6:03
- Unidentified speaker (speaker_0): to make my ROI as fast as possible? And Brains firmware is a great way to get there, right? With the efficiency gains that you see. So is that where you see sort of the biggest gains in efficiency? And I guess that's how you measure success, right? So if you if you take a machine, any given one, um, and you say this one outperforms the other, you are talking about how
- 6:23
- Unidentified speaker (speaker_0): much more efficient can I get this machine, correct?
- 6:25
- Unidentified speaker (speaker_1): Exactly, exactly. We want to know
- 6:28
- Unidentified speaker (speaker_1): how much we can tune those chips. And it gets it gets way more nuanced. Uh
- 6:34
- Unidentified speaker (UNKNOWN): and
- 6:34
- Unidentified speaker (speaker_1): you and again, it's a thing, it's it's a lottery. You like mining a box block, it's a lottery. But uh when you get uh the the hardware, you don't know where you're gonna firstly you don't know what's It's coming in the box, and you also don't know the grade of the silicon. Now you do have uh
- 6:51
- Unidentified speaker (speaker_1): model identifications on the on the hashboard, and you can determine which bin these silicons were produced. So silicon is produced in some sort of batches, and part of our site is and has has like let's say 75% is one bin type, and that bin type is doing really well. But it's not like we we
- 7:10
- Unidentified speaker (speaker_1): whispered in Bitmain's ear to get this these particular chips. It's it's what it's what we got out of the lottery.
- 7:17
- Unidentified speaker (speaker_0): It's just what we got. Yeah, yeah. And it shows that, you know, even if you're a brick name in the in the in the industry, you still have to go through these um struggles.
- 7:25
- Unidentified speaker (UNKNOWN): Um
- 7:26
- Unidentified speaker (speaker_0): and I don't know, more than one and a half decades into this game of Bitcoin mining, we still have to struggle with these types of issues, which is uh very very telling. Um Simon, we're here to talk a bit about the firmware and yeah, wintertime mining. It's rolling around uh for the majority of the network, I want
- 7:46
- Unidentified speaker (speaker_0): to say, right? Um, it's not
- 7:48
- Unidentified speaker (UNKNOWN): obviously winter everywhere.
- 7:50
- Unidentified speaker (speaker_0): Winter is coming, yes. No, when your winter comes, I'm I'm wearing shorts, uh 100% guaranteed.
- 7:57
- Unidentified speaker (UNKNOWN): Um
- 7:58
- Unidentified speaker (speaker_0): you work on monthly releases. Um, we talked a bit before about uh about the firmware. Tell tell me a bit more. So how why should why should miners consider using brains versus any other firmware when we're getting to the colder temperatures where yeah making sure that your mind doesn't get stuck or
- 8:18
- Unidentified speaker (speaker_0): frozen, uh literally um is important. Talk to me about that a bit.
- 8:22
- Unidentified speaker (speaker_1): Uh I think there's two distinctions that we should be up front. upfront about. Air air cooled miners and hydro miners have behave very differently in um in cold cold times. Your hydro miner will
- 8:37
- Unidentified speaker (UNKNOWN): have
- 8:37
- Unidentified speaker (speaker_1): a a what's called like a gate. It will stop it won't it won't uh uh bootstrap at less than 10 C. And this is to protect the miner because the coolant basically is not in direct contact with the chip, but it's you know, right next to the chip.
- 8:51
- Unidentified speaker (UNKNOWN): Um
- 8:52
- Unidentified speaker (speaker_1): we have uh a feature under our advanced section called Defrost where we push some power to the boards when it's less than 10 C to try and warm up the board so you're not uh so so you can try and initialize it earlier. Uh so
- 9:07
- Unidentified speaker (speaker_1): in that case, as as good as efficiency hydras are, they are a little bit fragile in the in the cold times. In extreme cold, no extreme tendency is not necessarily extreme, but it less than that for coolant is is getting quite cold. But your air noisy air cooled miners, they are quite resilient to the
- 9:27
- Unidentified speaker (speaker_1): ambient environment. So
- 9:29
- Unidentified speaker (UNKNOWN): uh
- 9:29
- Unidentified speaker (speaker_1): we have a thermal chamber, which we didn't talk about. It's uh it's like a big oven microwave, and it goes anywhere from
- 9:36
- Unidentified speaker (speaker_0): solar.
- 9:37
- Unidentified speaker (speaker_1): okay, so it goes, I don't know. the extremes now, but it goes from like I think minus 30 to plus 70. And we are now uh pushing our miners in there, uh air cooled miners in there. And just this week, in preparation to talk to you, we put an air cooled miner in there, and I wanted to test the uh the defrost
- 9:56
- Unidentified speaker (UNKNOWN): um
- 9:57
- Unidentified speaker (speaker_1): and uh our cold weather starting, and aircraft equip miners they don't need much help as long as that let's the say hardware is pretty good, uh they can start at almost anything. Okay.
- 10:08
- Unidentified speaker (speaker_0): So
- 10:09
- Unidentified speaker (UNKNOWN): can
- 10:09
- Unidentified speaker (speaker_0): sorry to interrupt you. So to to recap, right? The way I understand this: when the weather is too cold, the cooling infrastructure of hydro is too good
- 10:21
- Unidentified speaker (speaker_0): and keeps the temperature of the board too low for too long for it to really boot up and get. to a temperature where it's safe to operate. This
- 10:29
- Unidentified speaker (UNKNOWN): versus air
- 10:30
- Unidentified speaker (speaker_0): cooled miners where where cooling is obviously a bit less efficient because you just have hot a cold air blowing over the chips. And that cooling technology is a bit less efficient, but in winter that's actually beneficial because you're giving more room to the chips to do their thing.
- 10:46
- Unidentified speaker (speaker_1): Exactly, exactly, exactly.
- 10:48
- Unidentified speaker (UNKNOWN): Um
- 10:49
- Unidentified speaker (speaker_0): I saw that video of the of the chip. chamber. Maybe we can link it here somewhere. Yep. Do that fancy YouTube thing where you say, oh, watch it over here.
- 11:07
- Unidentified speaker (UNKNOWN): It was
- 11:07
- Unidentified speaker (speaker_1): an air cooled miner, but we have we are now developing like a very ugly hack. We actually put a dry cooler in the thermal chamber. so when then we can force a hydro miner to get cold. Because we it's really hard now that we have a thermal chamber, we need a thermal hydro chamber. But this is for testing, it's not for
- 11:24
- Unidentified speaker (UNKNOWN): you
- 11:24
- Unidentified speaker (speaker_1): know.
- 11:25
- Unidentified speaker (UNKNOWN): I
- 11:25
- Unidentified speaker (speaker_0): wanna see it when it's done. I wanna see it.
- 11:27
- Unidentified speaker (UNKNOWN): I can show you a very ugly picture, but we're actually
- 11:29
- Unidentified speaker (speaker_1): developing some stuff.
- 11:31
- Unidentified speaker (speaker_0): Okay, cool. So that's that's actually fantastic. So you're taking
- 11:35
- Unidentified speaker (UNKNOWN): um
- 11:35
- Unidentified speaker (speaker_0): you're generating data and you're feeding that into your firmware, which is probably something that I don't have, I haven't seen any other firmware provider do this. So you are actually able to build your software around more real-world operating conditions, which is fantastic. So if
- 11:55
- Unidentified speaker (speaker_0): if winter comes around, this helps just to be clear, Texas, right? I have a lot of clients. there, they're mining. It gets very cold there, right? So it gets into the minus temperatures. And if the mine goes down, you can use brains firmware to to more effectively heat the
- 12:15
- Unidentified speaker (speaker_0): miners up and have an easier time operating. So if you don't have brains and it's colder than 10C 10 C and the miners are off for a day, what do operators typically do? Simon? If they
- 12:28
- Unidentified speaker (UNKNOWN): hydros installed
- 12:29
- Unidentified speaker (speaker_0): it.
- 12:29
- Unidentified speaker (speaker_1): I think for the hydros, they are actually heating the coolant, or they might what the some call like have a heater miner. So they'll have like they might curtail some percentage of their fleet, let's say majority, 90% of their fleet, but they'll keep 10% to keep the coolant lines warm, to keep some heat into the system. And that's the main purpose of that, is so they can
- 12:49
- Unidentified speaker (speaker_1): bring the miners back up. when it's when it's getting too cold, for example. And I've also heard this people using this in containers as well. They'll really have like one miner per rack, which they call a heater c heater miner, to make sure the ambient air is not completely chilly or when they're hashing.
- 13:08
- Unidentified speaker (speaker_0): Interesting. Yeah I I have I have heard of miners also just using electric heaters without any mining attached. and just heating
- 13:15
- Unidentified speaker (UNKNOWN): up the containers.
- 13:24
- Unidentified speaker (speaker_0): Yeah.
- 13:26
- Unidentified speaker (speaker_0): Yeah. Well that's that's mining for you. Okay, cool. So installing S twenty ones, JXPs, Texas with brains firmware, you buy used machines, um where the warranty is maybe already gone.
- 13:40
- Unidentified speaker (speaker_0): Then obviously there's no downside there anymore. Because again, be aware if you install third-party firmware, if you don't know, you're gonna lose the warranty.
- 13:48
- Unidentified speaker (UNKNOWN): Um
- 13:49
- Unidentified speaker (speaker_0): the warranty on this machine. Um okay, cool. And what else, Simon? You heat up the miner. Um, explain that maybe a bit more in detail, like how how does that work effectively? How are you able to preheat? the machines uh when they run on hydro?
- 14:06
- Unidentified speaker (speaker_1): Yeah, so um
- 14:08
- Unidentified speaker (speaker_1): we we basically put sh a small amount of power to the board to the chips,
- 14:13
- Unidentified speaker (UNKNOWN): uh,
- 14:14
- Unidentified speaker (speaker_1): but it's not enough for them, but like with no instructions, so they're not actually hashing, they're not actually having been given, hey, here here's a job, work on this job.
- 14:24
- Unidentified speaker (UNKNOWN): Uh it's
- 14:25
- Unidentified speaker (speaker_1): getting a little bit beyond my technical understanding of what defrost is, but the way I I understand it is like, yeah, we're gonna uh push a power to to all the uh voltage domains on the board, and that naturally electricity naturally as it uh travels generates heat. So pass that through, and then uh the hashboards have their uh temperature
- 14:45
- Unidentified speaker (speaker_1): sensors on board, and that sort of ambient heat should radiate to the temperature sensor to lift the gate to say, okay, I'm now warm enough to start hashing.
- 14:54
- Unidentified speaker (speaker_0): Okay, so question there, Simon. Is it is it that the temperature? So let's say the temperature sensors are not in the picture. Yeah. Right? And it's too cold. What actually happens to the chip if you would just boot it up normally? Is it a bit like starting a cold R and going full cold full uh a cold car and just going full throttle on the
- 15:14
- Unidentified speaker (speaker_0): end? engine, and that it just has a lot of wear and tear on the chips, or what actually happens if you run them too cold?
- 15:20
- Unidentified speaker (speaker_1): So I
- 15:22
- Unidentified speaker (UNKNOWN): I've
- 15:22
- Unidentified speaker (speaker_1): never seen it in practice, but the theory is, and and like from the years of experience that I the with the people I work with, is that there's a real threat to cracking a chip because there's uh so much like thermal difference happening at once, exactly. the thermal expansion can actually uh break a chip or crack
- 15:42
- Unidentified speaker (speaker_1): a chip. Um and every literally every time we uh do some sort of cold testing in our facility, um
- 15:52
- Unidentified speaker (UNKNOWN): our
- 15:52
- Unidentified speaker (speaker_1): main team there is always worried, like what are we gonna do if we crack a chip? Like, what are we gonna do? And this is kinda like the extremes. Now, what's what's funny to us as like a third party vendor. of of uh firmware, people often asked us, like, so how cold can I go? And like, we didn't make the hardware, so it's you you know, we only know as much as what
- 16:12
- Unidentified speaker (speaker_1): we've done in our lab. It's not like we do we develop this machine, but this is what works for us in in our lab. It's so it's a it's a tricky thing and
- 16:21
- Unidentified speaker (UNKNOWN): we
- 16:21
- Unidentified speaker (speaker_1): often refer to the specification that Bitmain puts out. Uh
- 16:25
- Unidentified speaker (UNKNOWN): and
- 16:26
- Unidentified speaker (speaker_1): that's that's that's the sort of to you know explain to the people, explain to the customer that hey, you are in a little bit of uncharted territory. Some people are having amazing success with this, but there's a risk.
- 16:37
- Unidentified speaker (UNKNOWN): And
- 16:37
- Unidentified speaker (speaker_1): I'm like you said about the warranties, that's also a risk.
- 16:40
- Unidentified speaker (speaker_0): This episode and podcast is sponsored by Alta Ear Tech. Alta Ear is built by Buy miners for miners. And if you need a strong, reliable partner that provides ASIC hardware repeat. replacement parts, accessories, or practical support around mining infrastructure, from commercial miners to control boards, PSUs, PDUs, cables,
- 17:00
- Unidentified speaker (speaker_0): and consulting, they are a proper one-stop shop for Bitcoin mining gear. If you are building or expanding, check them out at altairtech.io.
- 17:11
- Unidentified speaker (UNKNOWN): Yeah,
- 17:11
- Unidentified speaker (speaker_0): no, I mean, look, the that we have already explored how
- 17:14
- Unidentified speaker (UNKNOWN): uh an
- 17:15
- Unidentified speaker (speaker_0): S21 JXP
- 17:18
- Unidentified speaker (UNKNOWN): is
- 17:18
- Unidentified speaker (speaker_0): not doesn't equal an S21 JXP, right? So this is the miner here, you get the cooling tubes. I just wanted to reflect this. So you have the hash rate, okay.
- 17:26
- Unidentified speaker (UNKNOWN): This
- 17:27
- Unidentified speaker (speaker_0): is at different temperatures as well.
- 17:29
- Unidentified speaker (UNKNOWN): So
- 17:29
- Unidentified speaker (speaker_0): you have the hash rate on this axis here, and then you got temperature from 15 to 55,
- 17:36
- Unidentified speaker (UNKNOWN): and it
- 17:36
- Unidentified speaker (speaker_0): doesn't it doesn't indicate operations at 15 goes to 20. The efficiency also increases or gets worse the higher it is. So the optimum seems to be around that 35 mark.
- 17:52
- Unidentified speaker (speaker_0): And I'm for some reason on the mobile view here. But if you go to the specifications, this is what we just mentioned right now. You can say environment requirements, inlet coolant temperature. C is 20 to 50 degrees.
- 18:07
- Unidentified speaker (speaker_0): So that's where the miner operates on paper.
- 18:12
- Unidentified speaker (UNKNOWN): And
- 18:12
- Unidentified speaker (speaker_0): then people are obviously adding antifreeze to
- 18:18
- Unidentified speaker (speaker_0): the coolant or glycol mix to make sure that the coolant doesn't freeze. Which is the same thing that happens in a car, right?
- 18:27
- Unidentified speaker (speaker_1): Exactly.
- 18:28
- Unidentified speaker (speaker_0): You don't want the liquid to freeze,
- 18:30
- Unidentified speaker (UNKNOWN): so
- 18:30
- Unidentified speaker (speaker_0): it stays cool. But then
- 18:32
- Unidentified speaker (UNKNOWN): yeah,
- 18:33
- Unidentified speaker (speaker_0): it's a it's a it's a the this is where the the operator really matters, right? Um I
- 18:37
- Unidentified speaker (UNKNOWN): was
- 18:38
- Unidentified speaker (speaker_1): curious.
- 18:38
- Unidentified speaker (UNKNOWN): Because anybody
- 18:39
- Unidentified speaker (speaker_0): can connect a dry cooler.
- 18:40
- Unidentified speaker (UNKNOWN): But
- 18:41
- Unidentified speaker (speaker_0): yeah.
- 18:41
- Unidentified speaker (speaker_1): I wanted to say I was talking to our operator this week, and uh we had some leaks uh this week, and uh
- 18:50
- Unidentified speaker (UNKNOWN): and
- 18:50
- Unidentified speaker (speaker_1): he he he was referring to last winter and he said it's really like alchemy. Like during the summer we need a little bit little bit less glycoal because then it just kinda works. But during the winter you need a little bit more 'cause last y w winter we had a freeze but if you put too much the the f uh the flow rate is affected. So you you know you might be more resistant to
- 19:10
- Unidentified speaker (speaker_1): freezing but you can't actually do the heat transfer. So it's really like it really like is too a chemist pouring things slowly in and asking, is that enough? It's it's it's quite an art.
- 19:19
- Unidentified speaker (UNKNOWN): Yeah, and plus you have like
- 19:20
- Unidentified speaker (speaker_0): temperature spikes.
- 19:21
- Unidentified speaker (speaker_1): Yeah.
- 19:22
- Unidentified speaker (speaker_0): You have temperature spikes as well. Like you have very, you know, sudden freezes and stuff like that. Um and then you need to run the miners, you need to overclock them to keep a certain temperature. Uh do you like is that some maybe something that that you guys are working on or already offer um where you can maybe tell the firmware to say, like, look, this is the
- 19:41
- Unidentified speaker (speaker_0): throughput, this is the outside temperature at this location, you can draw that live,
- 19:47
- Unidentified speaker (UNKNOWN): um,
- 19:48
- Unidentified speaker (speaker_0): this is the glycol mixture we put in, yada yada yada, and then let the miner control the temperature by automatically overclocking and like trying to stay in that optimum. Is that something that's possible?
- 20:00
- Unidentified speaker (speaker_1): So uh
- 20:02
- Unidentified speaker (speaker_1): no.
- 20:03
- Unidentified speaker (speaker_1): We are every now and then we do talk about can we get like a live feed of the of the ambient or the facility or uh some sort of feed from the dry cooler. Um but no, the only information we have is what the water like a hydro level there is the water inlet sensor. Uh and of course the outlets as well, because this is how we measure the tuner and so forth.
- 20:22
- Unidentified speaker (speaker_0): Sure.
- 20:22
- Unidentified speaker (speaker_1): But uh the whole the whole circuit uh we don't we don't have any visibility. I do fantasize about it sometimes, it would be cool, but it's we don't have anything there yet.
- 20:31
- Unidentified speaker (UNKNOWN): I
- 20:31
- Unidentified speaker (speaker_0): mean it
- 20:32
- Unidentified speaker (speaker_0): so how how difficult do you I don't know if this is a fair question to ask you, Simon, but um how difficult would it be to say hey brains firmware controls the pump of the dry cooler?
- 20:44
- Unidentified speaker (UNKNOWN): Uh and it's
- 20:45
- Unidentified speaker (speaker_1): I
- 20:45
- Unidentified speaker (UNKNOWN): guess it
- 20:46
- Unidentified speaker (speaker_0): would be more of a site management tool rather than minor specific, you know what I mean? But I mean that has to be possible.
- 20:53
- Unidentified speaker (speaker_1): So, like in theory, something like Brains Manager, which is like a fleet management tool, could actually control that. Uh, but one of the difficulties there, uh, and I was actually proposing something like this for PDUs. Uh, for example, S19 series, they don't have PSU power uh reading to the to the firmware. And we in our in our development,
- 21:13
- Unidentified speaker (speaker_1): we use a PDU to see. to how this miner is performing.
- 21:18
- Unidentified speaker (speaker_1): But
- 21:19
- Unidentified speaker (speaker_1): from what I know of the PDU world is that every PDU speaks a different language. It's impossible to support even a decent amount of PDUs. I maybe I may be exaggerating, but you might be able to support one manufacturer and then every site is going gonna to run a different PDU. So I imagine pumps, if they are somewhat remote
- 21:39
- Unidentified speaker (speaker_1): configurable,
- 21:40
- Unidentified speaker (UNKNOWN): you
- 21:40
- Unidentified speaker (speaker_1): need to understand all the different pump uh protocols and so forth. So
- 21:44
- Unidentified speaker (speaker_0): yeah,
- 21:44
- Unidentified speaker (speaker_1): it's very achievable. I think if you're if you're quite technical and you can like you know do this yourself, I think it's excellent. I think you're leveling up. But for us as a vendor, it's it's a minefield of support.
- 22:00
- Unidentified speaker (UNKNOWN): I
- 22:00
- Unidentified speaker (speaker_0): feel like this is a this is a uh a job. for AI.
- 22:05
- Unidentified speaker (UNKNOWN): You
- 22:06
- Unidentified speaker (speaker_1): you
- 22:06
- Unidentified speaker (UNKNOWN): know brains
- 22:07
- Unidentified speaker (speaker_0): manager, AI component, boom, put in your cooling infrastructure,
- 22:12
- Unidentified speaker (UNKNOWN): um,
- 22:13
- Unidentified speaker (speaker_0): write a short script, write that that that uh interface, that piece of software right in into the code, um and then test it and deploy it at everybody's risk, own risk. But I feel like that's a job that's that um should be done. doable for for for sort of an AI component
- 22:30
- Unidentified speaker (UNKNOWN): in
- 22:30
- Unidentified speaker (speaker_0): the firmware. That
- 22:31
- Unidentified speaker (UNKNOWN): could work.
- 22:34
- Unidentified speaker (speaker_0): Simon, talk to me about other miners. We talk a lot about Bitmain, hate them or love them.
- 22:43
- Unidentified speaker (speaker_0): Why is it that I mean we you just had um a bit big big spit on in the last episode? They are one of the few that provide. firmware for for micro BT machines. Why is it that Avalon and Micro BT machines are not so heavily supported, in your opinion?
- 23:04
- Unidentified speaker (speaker_1): I have various opinions. For uh to talk about micro BT. Um
- 23:11
- Unidentified speaker (speaker_1): the
- 23:13
- Unidentified speaker (UNKNOWN): let's
- 23:13
- Unidentified speaker (speaker_1): say Bitmain is has the largest market share, so that's where people are buying, spending their money, so it's there's more up the most opportunity there. As as for MicroBT and What's Miners, my understanding is that they actually do quite good firmware to begin with. Like they are
- 23:33
- Unidentified speaker (speaker_1): actually they have some uh type of tuner there, so they will push. a chip as hard as it should be or downscale a chip because it's underperforming. Uh also they put a lot of uh protections in place to stop third parties getting on there. So it's it's
- 23:53
- Unidentified speaker (speaker_1): it's it's hard and people I know there are vendors out there and you mentioned one already. Uh you have to do some alc alchemy to get your third-party software onto a uh What's minor. So
- 24:08
- Unidentified speaker (UNKNOWN): I
- 24:09
- Unidentified speaker (speaker_1): I would say I'll bring it down to two things. It's hard to get it on there, it's not completely impossible. We're also looking into it, like no secret, and it's not the first time we looked into it. We look at we look regularly into getting our stuff onto Wattsminers. Uh But actually, the the firmware there are are quite solid. I don't have too much experience with Wattsminers, What's Miners, but when I speak to our clients who have What's
- 24:29
- Unidentified speaker (speaker_1): Miners in their fleet, they're generally happy with them. They just run. They they hardware wise, firmware wise, they kind of just work.
- 24:36
- Unidentified speaker (UNKNOWN): Yeah.
- 24:37
- Unidentified speaker (speaker_0): No, I mean you see it as well. I mean, if you look at I mean uh Luxel recently uh released some Wattsminer firmware as well, but they don't have any efficiency gains. It's just uh UI and additional features, but there's no efficiency gains. So the reason
- 24:51
- Unidentified speaker (speaker_0): to to deploy it is a much different one. You know what
- 24:54
- Unidentified speaker (UNKNOWN): I mean?
- 24:55
- Unidentified speaker (speaker_1): Yes, yes, yes.
- 24:55
- Unidentified speaker (speaker_0): So it's it's interesting that you say that. And yeah, I've I've heard that as well, that it's just more difficult to get um into the firmware as well. Um and then talk to me about Avalons, Simon. Um you said you were working on Avalons before.
- 25:07
- Unidentified speaker (UNKNOWN): Yeah, we're working on
- 25:08
- Unidentified speaker (speaker_1): Avalons. We recently shared it on on on socials. Uh you know, if you have Avalon in your fleet, please, please reach out where We we are testing. Uh I was recently in Texas on site uh visiting clients who have an Avalon Avalon A15 Pro fleet, and uh the reason why this
- 25:28
- Unidentified speaker (speaker_1): project all started is they have a really bad reputation for overshooting. And uh this client in particular had a can container that was built out for S19 series out of I don't know which ones, but the the the the breakers were rated for 20 amps and they were regularly tripping uh
- 25:48
- Unidentified speaker (speaker_1): with these with these avalons. So uh when the temperatures got up, the the the miners were overshooting uh at least least uh sometimes anywhere to 400 500 watts. And when you have a container that was not designed for this kind of uh load they're tripping so you need to send someone out to site you have all these
- 26:08
- Unidentified speaker (speaker_1): miners doing nothing to flip the switch so we are now testing we're early days of testing but it's it's looking quite promising that we can actually maintain the power targets so you can really scope out your facility scope out your retrofit in an S19 facility and put uh a uh an out Avalon A15 Pro
- 26:28
- Unidentified speaker (speaker_1): in there. And going back to like how What's Midas has really good hardware in our eyes, the Avalons actually look pretty solid machines. They are they're getting quite quite resilient to all sorts of conditions, minus the overshooting
- 26:43
- Unidentified speaker (UNKNOWN): part. So
- 26:44
- Unidentified speaker (speaker_0): is that is that okay, we we let's go back to what you said earlier. Earlier it was all about efficiency. Now you're saying resilience. resiliency. What's more important?
- 26:54
- Unidentified speaker (speaker_1): I would say the most important thing is uptime. So anything that can keep your miner online or stopping things that will take it offline, that's that's that that's like the blocker. And then efficiency is like an optimization. So you have a stable fleet. How can I turn the dial a few more percent in my
- 27:14
- Unidentified speaker (speaker_1): favor? So resiliency against all sorts of conditions. Uh I my my background sort of started in like some sort of like system administration. And in those days, people ran data centers in climate-controlled facilities. And now poor little air called miners, they're rough, they're living in rough conditions.
- 27:34
- Unidentified speaker (speaker_1): So they need to be resilient. They're in hot boxes, literally. Um So
- 27:40
- Unidentified speaker (speaker_1): yes. So that that's what I mean by resiliency. Like no Windows, Linux server or whatever in the world would live in a condition where our uh where our ASICs are living, you know. So this is what I mean by resiliency.
- 27:54
- Unidentified speaker (speaker_0): They're very special machines.
- 27:55
- Unidentified speaker (speaker_1): Yes, they are.
- 27:56
- Unidentified speaker (UNKNOWN): Um Yeah,
- 27:57
- Unidentified speaker (speaker_0): no the the the the
- 27:59
- Unidentified speaker (speaker_0): the the Avalons, Simon, quick question on that follow-up. Do you know if they use Samsung or T SMC chips?
- 28:06
- Unidentified speaker (speaker_1): I don't know.
- 28:08
- Unidentified speaker (speaker_0): Okay. Because that's what you find with the micro BTs, right? With w in Africa, most people are are micro BT maxis because of that really resiliency, because the hard the operating additions are even more harsh, sites are super remote, it's difficult to get to them and on all of that good stuff, right? So you want you don't like the the best
- 28:27
- Unidentified speaker (speaker_0): efficiency is not actually as important as keeping the miner online. And the Samsung chips just have a better resiliency when it comes to temperatures. They like to they'll they have a broader operating
- 28:42
- Unidentified speaker (speaker_0): margin compared to the TSMC chips that live on the on on the bit main machines. Okay. Um Couple rapid fire questions Samuel Samu, before we wrap up. Are you ready?
- 28:53
- Unidentified speaker (speaker_1): Try me.
- 28:54
- Unidentified speaker (speaker_0): Alright. Cool. What's the worst mistake you see operators make when mining in winter?
- 29:01
- Unidentified speaker (speaker_1): Rapid fire.
- 29:05
- Unidentified speaker (UNKNOWN): Take
- 29:05
- Unidentified speaker (speaker_0): your time, we can cut
- 29:06
- Unidentified speaker (UNKNOWN): it.
- 29:15
- Unidentified speaker (speaker_1): Winter is hasn't even started yet, so I've got no context. Okay.
- 29:18
- Unidentified speaker (UNKNOWN): Winter is
- 29:19
- Unidentified speaker (speaker_0): coming, Simon.
- 29:20
- Unidentified speaker (speaker_1): Yes. I I would go back I'll I would go back to the hydros. Uh assuming that all is good because pumps break. And then we do have uh clients who had bind uh minor hashboards burn in in winter
- 29:34
- Unidentified speaker (UNKNOWN): uh
- 29:34
- Unidentified speaker (speaker_1): because the pumps were
- 29:35
- Unidentified speaker (speaker_0): broken.
- 29:36
- Unidentified speaker (speaker_1): Um and I am just recorded the video for our upcoming Friendsworth version, and I was kind of making a point where we have now a feature to protect uh miners during uh a hot start or hot start protection. So some I I I make the point that pressing resume on a miner because it stopped is not necessarily
- 29:56
- Unidentified speaker (speaker_1): safe. You need to understand why it stopped. And a few situations people were like res like mash bashing resume because they wanted their miner to hash, but it actually burnt the miner because it was complaining, hey it's too hot. So
- 30:08
- Unidentified speaker (UNKNOWN): we
- 30:08
- Unidentified speaker (speaker_1): we actually put an extra layer of protection there when the inlets are too hot, we won't let the miner start. So don't bash
- 30:13
- Unidentified speaker (UNKNOWN): the miner when it needs to stop
- 30:15
- Unidentified speaker (speaker_0): idiot.
- 30:16
- Unidentified speaker (UNKNOWN): Does
- 30:16
- Unidentified speaker (speaker_0): it say stop idiot and read read the error first? Yeah
- 30:19
- Unidentified speaker (UNKNOWN): exactly
- 30:20
- Unidentified speaker (speaker_0): um okay cool. What temperature should every operator alarm on? Like is it ambient, is it inlet, outlet, um coolant? What temperature is sort of the first thing that you look at where it's critical?
- 30:35
- Unidentified speaker (speaker_1): Uh for me it's always the the chip the chip temperature. We default on 90 degrees C. So if you're if you're under ninety C, uh then you should be fine, your minor miner should be happily hashing. If you have a reason to increase that on specific specifically on bitmains, we see avalons that can go higher. Uh you need a you
- 30:55
- Unidentified speaker (speaker_1): need to have a really good reason in my mind. Or you'll really want to run the miner to the ground. It's on its last legs, you just want it to hash no no matter what. And we have people like this as well.
- 31:03
- Unidentified speaker (speaker_0): Welcome. Yeah, okay, cool. Um you're building a mine in Canada, always cold, right? Never warm. Air hydro or immersion. Simon?
- 31:13
- Unidentified speaker (speaker_1): Okay, I would I would put immersion at the bottom because I I just hear a lot of horror stories. Like when you need to do repairs you know wash the c the fluid and all this kind of stuff. But I understand there is a little bit of simplic simplicity there. Um
- 31:29
- Unidentified speaker (UNKNOWN): if
- 31:29
- Unidentified speaker (speaker_1): it if it didn't need to curtail,
- 31:32
- Unidentified speaker (UNKNOWN): I
- 31:32
- Unidentified speaker (speaker_1): would go hydro. If it was expos exposed exposed to curtailment, I think I would go air cooled.
- 31:39
- Unidentified speaker (speaker_0): Clever. Okay, so behind the meter gas, always hydro.
- 31:43
- Unidentified speaker (speaker_1): Yeah, yeah, yeah, yeah, yeah.
- 31:45
- Unidentified speaker (speaker_0): Alright. Cool. Last question, and then you need to tell people where to find your lovely update videos and how to install Brains OS. Um what's the best feature that Brains OS offers besides efficiency gains?
- 32:04
- Unidentified speaker (UNKNOWN): So
- 32:04
- Unidentified speaker (speaker_1): the feature that's coming out now,
- 32:06
- Unidentified speaker (UNKNOWN): uh
- 32:07
- Unidentified speaker (speaker_1): continuous tuner. So it is efficiency gains, but it's
- 32:11
- Unidentified speaker (UNKNOWN): it's
- 32:11
- Unidentified speaker (speaker_1): adapts to the environment. So our previous auto tuner, our classic auto-tuner still works, it's great, but it was pinned to the current uh ambient or current uh environmental conditions. So it's 30 thirty 30c thirty C on on inlets. I'm gonna tune at 33 thirty three 30. thirty C inlet. But now continuous tuner, it's actually constantly sampling the
- 32:31
- Unidentified speaker (speaker_1): environment. So a hot day or cold night, it's constantly going to adjust your minor. So it's not necessarily about efficiency. It's the main maintain its power draw so you're not spiking or having like variance. It's to get the most out of your power drawer uh giving its current uh conditions. So continuous tuner.
- 32:50
- Unidentified speaker (UNKNOWN): Alright what
- 32:50
- Unidentified speaker (speaker_0): we've But been
- 32:50
- Unidentified speaker (UNKNOWN): we're
- 32:50
- Unidentified speaker (speaker_1): betting bigger.
- 32:51
- Unidentified speaker (speaker_0): Fantastic. Simon, where do people find more about your videos? Where can they download Brains OS?
- 32:58
- Unidentified speaker (speaker_1): Sure, so Brains dot com is where everything's at.
- 33:00
- Unidentified speaker (UNKNOWN): Uh
- 33:01
- Unidentified speaker (speaker_1): I'm on Twitter and the videos go on Twitter, so check out Brains on Twitter. I'm Simon Mayles on on Twitter. Uh but I'm I'm tagged on the videos if you really want to follow me.
- 33:12
- Unidentified speaker (UNKNOWN): Uh
- 33:12
- Unidentified speaker (speaker_1): but yeah and also LinkedIn and stuff like that. I don't know how many miners hang out on LinkedIn, but we're there too.
- 33:18
- Unidentified speaker (speaker_0): You did a fantastic job. This interview, you did a terrible job self-promoting yourself, so I will do that. Simon, follow this guy. Um, I'm sure the videos are definitely worth it. I will definitely try out the few features with the miners that I have access to. Simon Males, thank you very much for your time and for your support.
- 33:37
- Unidentified speaker (UNKNOWN): I
- 33:38
- Unidentified speaker (speaker_0): will not have spoken to you the last time. Let's let's make sure we do this again. All the best. Bye.
- 33:44
- Unidentified speaker (speaker_1): Thank you. Bye-bye.